Home > Linux Drivers > Logitech Quickcam 4000 Linux Drivers

Logitech Quickcam 4000 Linux Drivers

Contents

For the most current instructions, please read the README that comes with the driver. I would prefer to not use Yahoo, MSN, or AOL? in the case when out-of-the-box colors are too bluish/reddish/greenish) you may use GTK+ UVC Viewer (guvcview), available in the package guvcview. This problem did not exist in earlier versions of Ubuntu so it is a regression. weblink

The snapshot will be saved in your current folder as shotXXXX.png. Can you attach /var/log/kern.log - that should have captured it all. Cam Vista IM VF0420 Creative Vista Webcam VF0330 ASUS webcam Model? Webcam configuration If you want to configure brightness, color and other webcam parameters (e.g. http://www.noah.org/wiki/Logitech_QuickCam_Pro_4000_on_Ubuntu

Logitech Webcam Linux Drivers

CPiA based Webcams Please see the project home page for up-to-date information. How do I respond when someone is glad their loved one's suffering will end soon due to death? Luckily a new, still experimental driver that does not require a proprietary module is under development.

The dmesg output includes my logging in and testing the camera with Cheese. See http://www.smcc.demon.nl/webcam/tainting.html To check the installation run v4l-info and you will see some lines with: general info VIDIOCGCAP name : "Logitech QuickCam Pro 4000" To test the webcam you can use This change has been made by an automated script, maintained by the Ubuntu Kernel Team. Webcam For Linux Libusb Libusb is a library that allows access to the USB functions in Linux through userspace and without the need to enable kernel support and insert modules.

Colin Ian King (colin-king) wrote on 2009-10-14: #11 Try image: http://people.canonical.com/~cking/443278/linux-image-2.6.31-13-generic_2.6.31-13.45_i386.deb Changed in linux (Ubuntu): milestone: none → karmic-updates Jonathon Conte (thesicktwist) wrote on 2009-10-14: #12 dmesg output with debug enabled Linux Usb Camera Software Just install it and launch, and it will present you a list of configurable settings. The drivers and other useful information are available at the project homepage located here. If you get your webcam to work, add the name of the webcam and the driver you used to the list!

This time it may work. Ubuntu Web Camera The module names are quickcam and qc-usb. In addition, you will require libraw1394. Hot Network Questions I know what a bad photo is, so why do I keep taking them?

Linux Usb Camera Software

SPCA50X USB Camera Linux DriverInformation regarding this chipset can be found here, and is under heavy development and includes partial or complete support for the following models:

Kodak https://unix.stackexchange.com/questions/42036/how-do-i-get-my-logitech-quickcam-4000-up-and-running Philips USB Webcams Because of the expiration of the Non-Disclosure-Agreement between Philips Corporation and the former maintainer of the pwc driver, the previous kernel support for Philips PWC-chip-based webcams Logitech Webcam Linux Drivers Pencam, [email protected] and LegoCam). Linux Web Camera Software lsusb should show something relating to the camera, but it does depend on the drivers.

Alternatively, you can obtain the source from the project homepage. have a peek at these guys Troubleshooting Microsoft Lifecam Studio/Cinema Under certain configurations, the Microsoft lifecam studio/cinema may request too much usb bandwidth and fail see Uvcvideo FAQ. INSTALL.en taken from saillard: 1) download the file pwc-10.0.12-rc1.tar.bz2 (or the last available file on the site) wget http://www.saillard.org/linux/pwc/files/pwc-10.0.12-rc1.tar.bz2 2) unpack the file using the command command: tar xjf pwc-10.0.12-rc1.tar.bz2 3) The driver supports the following:

SE401 chipset via the 'se401' driver:

Aox SE401 camera

Philips PCVC665 USB VGA webcam 'Vesta Fun'

If you'd like to contribute content, let us know. Tested with Knoppix 2003-12-11, kernel 2.4.22 . modprobe -r pwc The pwc driver source explained below is basically unbuildable on recent Linux kernels. check over here Add it to /etc/modprobe.d/uvcvideo.conf: /etc/modprobe.d/uvcvideo.conf ## fix bandwidth issue for lifecam studio/cinema options uvcvideo quirks=0x80 Note: If delays are visible in the logs, or the camera works periodically, this workaround should

This chipset has been used in the manufacture of both USB and parallel port webcams including the following:

Aiptek HyperVcam Fun USB (non-OV511 based)

What Is Qc Usb mpv To use mpv to take snapshots from your webcam run this command from the terminal: $ mpv tv:// --tv-driver=v4l2 --tv-device=/dev/video0 From here you have to press s to take the Content is available under unless otherwise noted.

You should see something like this: $ dmesg|tail sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.24a usb 1-1: SN9C10[12] PC Camera Controller detected (vid/pid 0x0C45/0x600D) usb 1-1: PAS106B image sensor

If you need to reset your password, click here. I don't get a successful first attempt as you seem to mention above. (Still pwc: Philips webcam module version 10.0.13 loaded.) Surprised at "incomplete" status - and happy to fill in try this lik for starters: http://www.saillard.org/linux/pwc/ ghatamos View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by ghatamos 06-08-2006, 02:01 PM #3 jz32300 Logitech C270 Linux Thanks!

Disclaimer QuickCam is registered trademark of Logitech. Dominique Derrier (derrierdo) wrote on 2010-01-28: #23 I've got the same trouble ... Axel G. http://assistepc.com/linux-drivers/logitech-quickcam-connect-linux-drivers.php How do I deal with a counterproductive scrum team?

stv680 Many cheap no-name cameras that came out Asia in the last couple of years use the stv680 chipset. Patrick Welche (prlw1) wrote on 2010-07-21: #33 It seems I see a regression: on lucid lynx 10.04.1 2.6.32-24-generic i686, the camera doesn't work if it wasn't connected at boot. Jonathon Conte (thesicktwist) wrote on 2009-10-15: #16 kern.log Edit (625.8 KiB, text/plain) Colin, I have attached kern.log after booting using your debug kernel with the camera plugged in during boot. Get it from the Sourceforge release page.

If cam disconnected launch from a terminal sudo modprobe-r pwc, then connect the webcam and I'm starting camorama works again perfectly. It will display what your webcam sees in a window. It may show some reasons why this driver fails in this mode. pulseaudio /dev/snd/pcmC0D0p: jconte 2534 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Live'/'SB Live! 5.1 (rev.7, serial:0x80641102) at 0x9000, irq 23' Mixer name : 'eMicro

Indeed, when I plug the webcam twice, there is a trouble :( - First time it's working with camorama... Supporting the Connection Type2.2.1. ekiga Install the ekiga package. Skype).

The word for discrimination against people from other regions within a country? It may require a kernel recompile after patching depending on your kernel version.

2.3.2. Install it with the kdenetwork-kopete package. There are two ways of supporting USB devices in Linux.

In this case, change the buffering by loading the uvcvideo driver with quirks=0x80. Thanks, Dennis Try Gnomemeeting or Kphone..//drum drumvudu View Public Profile View LQ Blog View Review Entries View HCL Entries View LQ Wiki Contributions Visit drumvudu's homepage! You can then confirm the module was loaded by checking the syslog or in the boot-time record with dmesg | less), where you should see an entry such as the